| 1. The tools necessary for given work, include support for car maintenance in the lifted condition, a face key for отдавания a drain stopper, drain capacity, newspapers and pure rags. It is necessary to prepare also necessary quantity трансмиссионного oils (the Section “Types and volumes of applied greasings and liquids” see). |
| 2. Transmissionnoe oil merges in a hot condition (i.e. right after trips on the car); from hot oil pollution is easier leave. Works are better for making in rubber gloves. |
| 3. Поддомкратьте the car and reliably establish it on support. Try to establish the car as it is possible more exactly. |
| 4. Place the necessary equipment under the car, trying not to concern hot components of final system. |
|
5a. Place drain capacity under transmission and remove a bulk stopper from a lateral part of transmission. Ослабьте a drain stopper. The stopper of an aperture for plum of oil of transmission MSG is from the bottom party on intermediate картере, in a place shown on иллюстр. |
|
5b. Transmission MUA has two drain stoppers shown on иллюстр. At plum both stoppers turn away. |
| 6. Cautiously remove a drain stopper. Try not to burn thus hot oil. |
| 7. Allow to oil to flow out completely. Carefully clear a drain stopper, then establish it and reliably tighten. |
| 8a. Read instructions Check of level of oil in a manual box of a gear change and a distributing box Has undressed and fill transmission by new oil, then establish a cover of a bulk mouth and reliably tighten it. |
|
8b. An arrangement of jellied stoppers of transmission MSG. Here there is only one aperture. |
|
8c. An arrangement of jellied stoppers (2 stoppers) transmissions MUA. At check of level of oil both stoppers turn away. |
| 9. Lower the car on the earth. Having passed the first some kilometres, check up, whether the drain stopper proceeds. |
