The brake system of car Frontera from the middle of 1995 of release has been completely processed. Thereof the description of brake system shares on two parts.
Forward wheels of the car have disk brakes. Скоба it is formed by a support and the wheel cylinder. Design details are described more low.
From the middle of 1995 of release Frontera it is equipped with disk brakes of back wheels. The antiblocking system is an additional complete set. Forward disks have been increased till the diameter of 280 mm. Disks have a thickness of 26 mm.
Back wheels of the car to the middle of 1995 of release are equipped by drum-type brakes, after the specified term the disk brakes taken from car Monterey, also let out by firm Opel. Diameter of disks of 313 mm, a thickness of 18 mm. On an inside of back disks are колодки a lay brake.
The brake system contains the vacuum amplifier located between a brake pedal and the main brake cylinder. Разряжение undertakes from the engine. The combination of the main brake cylinder to the vacuum amplifier has been entered after processing of a design of brake system. The main brake cylinder and the vacuum amplifier are not subject to repair and in case of their damage are replaced.
Type |
- To the middle of 1995 of release | Two-planimetric, with disk forward and drum-type back brakes. In a contour of back brakes the valve of adjustment of pressure is established. The lay brake operates on back brakes. There is a vacuum amplifier |
- From the middle of 1995 of release | Two-planimetric, with disk forward and back brakes. The lay brake operates on separate brake колодки on back wheels. There is a vacuum amplifier |
- Cars with ABS | Two-planimetric, with disk forward and back to brakes. The brake system copes the hydrounit. The lay brake operates on separate brake колодки on back wheels |
Brake mechanisms
|
- Forward wheels | Disk with floating скобами, self-established |
- Back wheels | Drum-type or disk with floating скобами,
The self-established |
- Lay brake | Operates on back wheels.
Separate brake колодки from the internal
The parties of back brake disks |
Backlash in interface of the piston to the cylinder 0.04 - 0.125 mm, a limit (to the middle of 1995 of release) |
0.15 mm
|
The brake amplifier, distance from a flange
Till the end of a rod (till the end of 1995 of release) |
18 - 18.2 mm
|
The return valve, hose of low pressure | The arrow on the valve specifies in joining to a final collector |
Brake liquid | Only established by firm Opel |
Liquid replacement | Till the end of 1995 of release once a year, further each 2 years
|
Quantity of a filled in liquid |
About 0.4 l |
Persistent bolt of the main brake cylinder (all models) |
6
|
The pipeline to the main cylinder | 12 |
Support to directing (directing fingers:)
- Forward brake, to the middle of 1995 of release
- Forward brake, from the middle of 1995 of release
- Back brake, from the middle of 1995 of release |
32
74
44
|
Brake hose forward to the pipeline | 19 |
Brake drum to a wheel nave | 4 |
The union for air removal to the wheel cylinder | 8 |
Counternut, brake pedal | 34 |
The holder of a regulator of brake effort to the bridge | 13 |
The main brake cylinder to the amplifier | 13 |
The main brake cylinder to a tee | 16 |
The brake pipeline to the hydrounit | 15 |
Counternut a pusher of the amplifier of a brake (to the middle of 1995 of release) | 27 |
Counternut, plug of a pusher of the amplifier of a brake
| 20 |
Counternut of a regulator of a lay brake | 12 |
Nuts of fastening of the hydrounit | 9 |
Regulator of brake effort to the holder | 12 |
Nuts of fastening of the amplifier of a brake:
- To the middle of 1995 of release
- From the middle of 1995 of release |
26
21
|
The wheel cylinder to a brake board | 10 |
Hollow bolt of a brake hose to a support | 35 |
Bolt of fastening of a tank | 2 |
The top bolt of the forward gauge of angular speed ABS | 6 |
The bottom bolt of fastening of a cable of gauge ABS | 27 |
Bolts of fastening of a forward casing of a brake disk | 13 |
Support fastenings:
- The forward
- The back |
212
104
|
The holder of a brake hose back to the bridge
| 13 |
The holder of a cable of a lay brake to the bridge | 9 |
The lever of a lay brake to a floor | 20 |
Bolts of fastening of an asterisk of gauge ABS | 18 |
Bolts of fastening of a cable of back gauge ABS | 22 |
Bolts of fastening of forward gauge ABS | 9 |
Nakidnye nuts of brake pipelines | 15 |
Wheel fastening:
- With steel disks
- With disks from easy alloys |
110
120
|