Opel Frontera

Since 1992 of release

Repair and car operation



Opel of Frontera
+ Cars of mark Opel Frontera
+ Current leaving and service
+ The engine
+ Cooling and heating systems
- The power supply system and release
   + The power supply system инжекторных engines
   + Systems of release and decrease in toxicity of the fulfilled gases
+ Engine electric equipment
+ Coupling
+ Manual box of a gear change
+ Kardannye shaft, the main transfer
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Controls and operation
+ Electric equipment schemes


8eee0de7

The power supply system and release

THE GENERAL DATA

Specifications

The remark

Separate characteristics are resulted also in the text of the Head


Design of system of injection:
Multiitem injection
  – The engine of 2.0 l ОНС to the middle of 1995 of release, with electronic control
Motronic M 1.5
  – The engine of 2.4 l to the middle of 1995 of release, with electronic control
Motronic M 1.5
  – The engine of 2.0 l from the middle of 1995 of release, with a uniform control system of the engine, new system рецируцляции the fulfilled gases
Motronic M1.5.4.
  – The engine of 2.2 l (DOHC), series "ECOTEC" with regulation on a detonation, рециркуляцией the fulfilled gases and system подмешивания secondary air
Motronic 1.5.4.
  – Idling and concentration WITH
Are regulated automatically
Katalitichesky neutralizer
Three-functional, with the oxygen gauge

Efforts of a tightening of carving connections, Nanometer


The moments of an inhaling of fixture are resulted also in the text of the Head.

Engine OHC of 2.0 l till 1995 of release
Final collector to the block of cylinders
22
The muffler to a flange of a reception pipe
25
The fuel pipeline to the inlet pipeline
8
Engine OHC of 2.0 l from the middle of 1995 of release
Final collector to the block of cylinders
22
The detonation gauge to the block of cylinders
25
The oxygen gauge in the muffler
30
Подкос to a final collector and the generator
18
Support to an inlet collector and the generator
18
Reception pipe with каталитическим neutralizer to a final collector and the muffler
25
Heat-shielding sheet to a final collector
Heat-shielding sheet to a head of cylinders
30
Engine DOHC of 2.2 l
Final collector to the block of cylinders
22
The detonation gauge to the block of cylinders
20
Fuel distributive highway to a final collector
8
The oxygen gauge in the muffler
30
Распорка to a final collector and the generator
18
Support to an inlet collector and the generator
18
Reception pipe with каталитическим neutralizer to a final collector and the muffler
25
Heat-shielding sheet to a final collector
Heat-shielding sheet to a head of cylinders
30
The engine of 2.4 l
The oxygen gauge
30
Bolts of fastening of a final collector
35
Temperature-sensitive element
10