Opel Frontera

Since 1992 of release

Repair and car operation



Opel of Frontera
+ Cars of mark Opel Frontera
+ Current leaving and service
+ The engine
+ Cooling and heating systems
+ The power supply system and release
+ Engine electric equipment
+ Coupling
+ Manual box of a gear change
+ Kardannye shaft, the main transfer
+ Brake system
- Suspension bracket and steering
   + Suspension bracket of forward wheels and the forward bridge
   + Suspension bracket of back wheels and the back bridge
   + Steering with the hydraulic booster
+ Body
+ Onboard electric equipment
+ Controls and operation
+ Electric equipment schemes


8eee0de7

Suspension bracket and steering

THE GENERAL DATA

Specifications


The remark

Separate characteristics are resulted also in the text of the Head.


Forward suspension bracket

The 5-step manual transmission, all transfers forward are synchronised

Type
Independent, on dual cross-section levers, telescopic shock-absorbers, with the stabilizer of cross-section stability and торсионами adjustments of height of a road gleam
The given adjustments of wheels
See more low
Marks of a spring of a suspension bracket
Marks colour
Establish springs only with one marks. Springs have one- or two-coloured marks.
The bearing of the forward
Wheels
It is established in a rotary fist

Back suspension bracket

Type
  – To the middle of 1995 of release

  – From the middle of 1995 of release


Sheet springs and rigid axis

Screw springs, bars and the stabilizer of cross-section stability

Steering

Design features The mechanism of type "screw-nut"
On circulating balls
With the hydraulic booster
The transfer relation of the steering mechanism 15.8 : 1
Hydraulic booster liquid
  – Quantity of a filled in liquid
Special liquid "Dexron"
  – 1.0 l
Adjustments Are not made
Max. Pressure in system:
- All cars with engines of 2.0 and 2.4 l till 1995 of release
- All cars from the middle of 1995 of release

83 - 88 bar

93 - 100 bar
Max. An admissible free wheeling of a steering wheel 10 - 30 mm
Corners of installation of forward wheels
Disorder
- To the middle of 1995 of release
- From the middle of 1995 of release
Ненагружен
+0°30’±1 °
0°±1 °
Ненагружен
+1°05 ’ +1 °
0°±1 °
Difference in disorders of the left and right wheels:
- To the middle of 1995 of release
- From the middle of 1995 of release

30’
45’

30’
45’
Corner of a longitudinal inclination of an axis of turn:
- To the middle of 1995 of release
- From the middle of 1995 of release


+2°30’±1 °
+2°10’±1 °


+2°50 ’ +1 °
+2°50 ’ +1 °
Difference in corners of a longitudinal inclination of axes of turn of the left and right wheels:
- To the middle of 1995 of release
- From the middle of 1995 of release



45’
35’



45’
35’
Convergence:
- To the middle of 1995 of release
- From the middle of 1995 of release

+1.00 ± 2.00 mm
5.5 ± 0.5 mm

2.00 ± 2.00 mm
0 ± 2.0 mm
Instructions
Corners of a convergence of both wheels within the set admission should have either negative or positive value.
Steering wheel angle of rotation At 20 ° turn of an external wheel the internal should be turned on 21 ° 50 ’ ± 1 °
Cross-section inclination шкворня:
- To the middle of 1995 of release
- From the middle of 1995 of release
It is loaded
9°25’
12 ° 30’±30’
Ненагружен
10°±1 °
12°30’±30’

Privodnoj belt of the pump of the hydraulic booster
The engine of 2.4 l to the middle of 1995 of release


Length of a belt 813 mm
Width of a belt 9.5 mm
Belt tension:
  – The new
  – Second-hand

450 Н
250-300 Н
In the presence of the conditioner
Length of a belt 960 mm
Width of a belt 9.5 mm
Belt tension See above

Efforts of a tightening of carving connections, Nanometer

The moments of an inhaling of fixture are resulted also in the text of the Head.

The forward bridge / a forward suspension bracket
Gauge ABS to a rotary fist 9
Gauge ABS cable to a steering bolt 26
Bridge arm to картеру the bridge:
- Till 1995 of release
- Since 1995 of release

82
93
Bridge arm to the chassis 152
Differential beam to картеру the bridge:
- At 3-door model
- At 5-door model

28
54
The case automatic блокиратора naves
To a wheel nave
59
Overlay торсиона to the bottom steering lever 116
Kardannyj shaft to a flange of the main transfer
The forward bridge
75
Kardannyj shaft to a flange of a distributing box:
- At transmission MSG (3-dvernyj the car)
- At transmission MUA (5-dvernyj the car)

35
75
Back карданный the hinge, the bottom lever to the chassis 200
Kardannyj shaft, the top lever to plugs 108
The case manual блокиратора naves to a wheel nave 12
The case manual блокиратора naves-kartera
Couplings to the nave case
60
Nut of a connecting bar of the stabilizer of cross-section stability:
- To the middle of 1995 of release
- From the middle of 1995 of release

10
51
Top карданный the hinge of a steering shaft to the chassis 155
The top hinge to the lever
- To the middle of 1995 of release
- From the middle of 1995 of release

33
61
The top hinge to a rotary fist 105
Stopper of an aperture for oil pouring in картере 45
Cross-beam, forward suspension bracket to the chassis 75
Wheel fastening:
- Steel disks
- Disks from easy metals

110
120
Bolts of fastening of an asterisk of gauge ABS 18
Brake disk to a wheel nave 103
Nut of an emphasis of restriction of turn of a wheel 23
Steering bent for to the hinge 120
Fastening of the stabilizer of cross-section stability to the chassis:
- To the middle of 1995 of release
- From the middle of 1995 of release

28
20
The shock-absorber to the chassis 20
The shock-absorber to the lever 83
The bottom hinge to a rotary fist 140
Forward шаровый the hinge, the bottom lever to the chassis 160
The back bridge / a back suspension bracket
Bolts of fastening of a cover of differential 24
Nuts of fastening of the holder of a semiaxis (cars with disk brakes) 75
Nut of fastening of connecting draught, the brake amplifier 13
Stopper of an aperture for oil pouring in картере 45
Sheet of fastening of a semiaxis (drum-type brakes) 95
Bolts of fastening of a flange карданного a shaft 75
Bolts of fastening of an intermediate support карданного a shaft
33
Back suspension bracket - sheet springs:
- Arm nuts
- Coupling bolt
- Nuts of shock-absorbers
- Bolts of fastening of the buffer
- Nuts of fastening of a step-ladder

108
160
40
42
68
Back suspension bracket - screw springs:
- Cross-section jet bar to the bridge
- Cross-section jet bar to the chassis
- The shock-absorber to the bridge
- The shock-absorber to the chassis
- The holder, gauge ABS
- скоба, cable ABS to the average lever
- The bridge buffer to the chassis
- скобы a cable of a lay brake
- Fastening bolts, the longitudinal lever
- Fastening bolts, the average lever
- Bolts of fastening of the stabilizer of cross-section stability to the chassis

80
165
80
105
26
26
37
9
165
165
22
Instructions
Both on a forward suspension bracket, and on back (both executions) certain bolts and fastening nuts should be tightened, when the car costs on wheels. Instructions are in this respect resulted in corresponding sections. Thus tighten all connections of a suspension bracket having rubber elements.
Steering
Counternut of an adjusting bolt of a segment shaft 41
Counternut of a tip of steering draught 120
Tightening a tank bolt 7
Steering сошка to a rotary pin 118
Steering сошка to the steering mechanism 216
The intermediate steering lever to the chassis 45
Nut, tightening a bolt карданного the hinge 25
Steering wheel nut to a steering column 35
Nut the helmsman сошки to the steering mechanism 220
Nut of the intermediate lever to average steering draught 60
Nut of the intermediate lever to a rotary pin 130
Nut of fastening of an arm to the chassis 48
Nuts of fastening of a steering to the chassis 44
Nut of a tightening bolt 40
Nut of a tip of steering bent for сошке 110
Collars 20
Bolt of fastening of a steering column to днищевому to sheet 20
Bolt of fastening of a steering column to the top arm 17
Nakidnaja nut of the pressure head pipeline of the pump 20
Nakidnaja nut of the pressure head pipeline to a steering 45
Nakidnaja nut of the drain pipeline to the pump 45