Opel Frontera

Since 1992 of release

Repair and car operation



Opel of Frontera
+ Cars of mark Opel Frontera
- Current leaving and service
   The routine maintenance schedule
   Current leaving
   The information on adjustment
   Check of levels of liquids
   Check of a condition of tyres and pressure in them
   Replacement of impellent oil and the oil filter
   Check of level of a liquid of system of hydrostrengthening of a wheel
   Rotation of wheels
   Check of a condition and replacement of hoses of an impellent compartment
   Condition check, adjustment of a tension and replacement приводного a belt (only for engines with tension adjustment)
   Check and adjustment of turns of idling of the engine and level WITH
   Check of a condition of the battery, care it and gymnastics
   Check and replacement of spark plugs
   Check and replacement candle ВВ wires, a cover and бегунка the distributor
   Check of level of oil in a manual box of a gear change and a distributing box
   Check of level of a lubricant liquid of differential of forward and back bridges
   Check of fuel system
   Check of functioning of system of cooling
   Check of a condition of system of release of the fulfilled gases
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of power shafts of forward wheels
   Make check of brake system and replacement of a brake liquid with the subsequent prorolling
   Check of a condition and replacement of brushes of screen wipers
   Refuelling of a cooler of system of cooling
   Replacement of the fuel filter
   Replacement трансмиссионного oils РКПП and a distributing box
   Replacement of a lubricant liquid of differential of forward and back bridges
   Replacement of a distributive belt of the engine
+ The engine
+ Cooling and heating systems
+ The power supply system and release
+ Engine electric equipment
+ Coupling
+ Manual box of a gear change
+ Kardannye shaft, the main transfer
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Controls and operation
+ Electric equipment schemes



Check of functioning of system of cooling

PERFORMANCE ORDER
1. Many gross infringements in engine work are connected with malfunctions of system of cooling. If the car is equipped by automatic transmission its functioning and service life also directly are connected with work of system of cooling.
2. Check of system of cooling should be made at the cold engine, therefore is better be engaged in it before the first trip for a present day or not earlier than in three hours after engine deenergizing.
3. Slowly, being careful in case the engine has not absolutely cooled down yet, uncover a radiator. Carefully wash out it from within and outside of pure water. Also wash out a jellied mouth of a radiator. Presence of traces of corrosion in a jellied mouth means that it is necessary to replace a cooler (the Section Replacement of the fuel filter) see. The cooler in a radiator should be rather pure and transparent. If it has brownish colour, drain system and fill in in it a new cooler.
Hoses, also as well as приводные belts, have property to fail at the most inappropriate moment - in order to avoid the troubles connected with rupture of hoses of a radiator or a heater, attentively examine them, as is shown in drawing.
4. Carefully check up radiator hoses, and also hoses of a heater which have smaller diameter. Check hoses of system of cooling on all length, making replacement of any burst, blown up or worn out hose. Cracks are easier for finding out if to compress a hose a hand. Will pay special attention on the collars keeping hoses on components of system of cooling. These collars can cut or pierce hoses that will lead to cooler leak.
5. Make sure of reliability of fastening of all шланговых connections. Cooler leaks are usually shown in the form of white or rusty colour of adjournment in the field of hermetic sealing infringement. If on your car collars of wire type it is possible are used, there is a sense to replace them with collars of screw type.
6. By means of compressed air or a soft brush clear a forward part of a radiator (and also the condenser of the conditioner of air, there, where it is available). Remove all insects, leaves and the other extraneous subjects which have got on edges of a radiator. Be very cautious not to damage an edge and not to cut about them fingers.
7. If cooler level constantly falls, and you have not found out any leaks, it is necessary to make check by pressure of a cover of a radiator and all cooling system.