Opel Frontera

Since 1992 of release

Repair and car operation


Opel of Frontera
+ Cars of mark Opel Frontera
+ Current leaving and service
- The engine
   Removal and engine OHC installation
   Removal and engine DOHC installation
   Engine dismantling
   Engine assemblage
   Head of cylinders and valves
   Pistons and rods
   The block of cylinders
   Cranked shaft and bearings of a cranked shaft
   Camshaft drive
   Engine mounts
   Compression check
   Greasing system
   Works with system of greasing of engine OHC/DOHC of 2.0 l
   Works with greasing system on the engine of 2.4 l
   The oil filter
   Oil radiator (if it is established)
   Pressure and oil temperature
+ Cooling and heating systems
+ The power supply system and release
+ Engine electric equipment
+ Coupling
+ Manual box of a gear change
+ Kardannye shaft, the main transfer
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Controls and operation
+ Electric equipment schemes

8eee0de7

Greasing system
THE GENERAL DATA

The system of greasing of the engine supplies it in the course of work as lubricant oil.
The greasing system consists of the oil pump, the pallet картера, редукционного the valve and gauges of indexes of pressure and oil temperature. The system has also the valve of switching of oil for work on a short contour.
The engine of 2.0 l and engine DOHC have an identical design of system of greasing. It concerns engines till the end of 1996 of release, and also with 1997г. Release. At the latest model engine the so-called bearing pallet картера has been established to provide placing established at the same time подшипникового the bridge. The pallet design картера in a back part has been changed to provide possibility of interface of a transmission with the pallet картера. The Podshipnikovyj bridge is fixed by bolts to the bottom party of the block of cylinders and covers of radical bearings of a cranked shaft and forms thus a rigid design. Established маслоуспокоительный the sheet is fixed by bolts to the bottom party подшипникового the bridge. In this connection the index of level of oil and a soaking up branch pipe of the oil pump have been changed also. The details established on these engines are considered at the description of process of removal and pallet installation картера.