Opel Frontera

Since 1992 of release

Repair and car operation



Opel of Frontera
+ Cars of mark Opel Frontera
+ Current leaving and service
+ The engine
+ Cooling and heating systems
+ The power supply system and release
+ Engine electric equipment
+ Coupling
+ Manual box of a gear change
+ Kardannye shaft, the main transfer
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Diagnostics of malfunctions of an onboard electric equipment
   Safety locks
   Fusible inserts (thermal relays)
   Chain breakers (thermal relays)
   The relay
   Lighting devices
   Removal and installation of a sound signal
   Servomotor of adjustment of range of light
   Screen wiper
   Cleaner of back glass
   Electric schemes
+ Controls and operation
+ Electric equipment schemes



Servomotor of adjustment of range of light

THE GENERAL DATA

The length приводных draughts at a servomotor is adjusted by the manufacturer. To change it it is impossible. Before servomotor removal establish the regulator switch at the included headlights in position "0". After that switch off illumination.

Removal

The servomotor acts in film as follows:

PERFORMANCE ORDER
1. Расстыкуйте multicontact штекерное connection.
2. Turn a servomotor located opposite to a back wall of a headlight, on a corner 45 counter-clockwise if it is a question of the right engine, or on 45 on an hour hand if it is a question of the left engine and take out the engine with приводными draughts from шаровый support in a headlight.

Installation

PERFORMANCE ORDER
1. At installation completely enter приводные draughts into a spherical support in a headlight.
2. Check up correctness of installation and turn the right engine to the right, and left on the left in the headlight case.
3. In summary join штекерное connection and to check up work of a headlight and the adjustment mechanism.