Opel Frontera

Since 1992 of release

Repair and car operation



Opel of Frontera
+ Cars of mark Opel Frontera
+ Current leaving and service
+ The engine
+ Cooling and heating systems
+ The power supply system and release
+ Engine electric equipment
+ Coupling
+ Manual box of a gear change
+ Kardannye shaft, the main transfer
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Diagnostics of malfunctions of an onboard electric equipment
   Safety locks
   Fusible inserts (thermal relays)
   Chain breakers (thermal relays)
   The relay
   Lighting devices
   Removal and installation of a sound signal
   Servomotor of adjustment of range of light
   Screen wiper
   Cleaner of back glass
   Electric schemes
+ Controls and operation
+ Electric equipment schemes


Cleaner of back glass

THE GENERAL DATA

Removal and installation of a cleaner of back glass depends on car model.

Frontera Sport

PERFORMANCE ORDER
1. Remove the cleaner lever, a brush and an internal cover приводного the electric motor (turn away 2 screws).
2. Расстыкуйте штекерное connection.
3. Turn away the screw, a nut and plugs of the holder of the electric motor.
4. Remove from a shaft of the electric motor a nut, a washer and plugs and take out the electric motor. Electric motor fastening is shown on an illustration.

The screen wiper in sequence, by return to removal is established.

PERFORMANCE ORDER
1. Nuts of fastening of the electric motor tighten the moment of 6 Nanometers, a bolt and a nut of fastening of the holder the moment of 4 Nanometers.
2. Before installation of the lever of a cleaner and a brush include quickly and switch off the electric motor, having convinced that the electric motor shaft comes back in a starting position.

Frontera

PERFORMANCE ORDER
1. Remove internal facing of a door of a back and remove from the interior of a door of a cover of apertures.
2. Remove the lever of a cleaner and a brush.
3. Turn away a nut, remove a washer and the plug from a cleaner axis.
4. Расстыкуйте штекерное connection.
5. Turn away four bolts of fastening and remove the electric motor of a cleaner with приводными draughts.
6. Remove draughts from the electric motor, turn away three bolts of fastening and remove the electric motor from a plate.

The screen wiper in sequence, by return to removal is established.