Opel Frontera

Since 1992 of release

Repair and car operation

Opel of Frontera
+ Cars of mark Opel Frontera
+ Current leaving and service
+ The engine
+ Cooling and heating systems
+ The power supply system and release
+ Engine electric equipment
- Coupling
   Removal and coupling installation
   Coupling repair
   Coupling installation
   Check of coupling without removal
   The mechanism of deenergizing of coupling
   Removal of air from hydrosystem
   Adjustment of height and pedal free wheeling
+ Manual box of a gear change
+ Kardannye shaft, the main transfer
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Controls and operation
+ Electric equipment schemes


Check of coupling without removal


Before removal of coupling for the purpose of its replacement it is necessary to perform following works for definition of a place of damage.

1. Start the engine and allow to it to work on single turns.
2. Press a pedal of coupling and wait nearby 3 with.
3. Include a backing. If from a transmission noise it can specify in presence of damages to coupling or in connection of coupling with a flywheel is audible.

For coupling check on proslipping the following becomes:

1. Will sweep on the car some distance so that the transmission and coupling have got warm to working temperature.
2. Stop the car and cock a lay brake. Include the third transfer.
3. Press a coupling pedal. Increase number of turns of the engine to 3000 - 4000 rpm and suddenly release a pedal. If the engine stops at once, coupling works normally.