Subaru Legacy/Outback

1999-2003 of release

Repair and car operation



Subaru Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
- Manual box and differential
   Specifications
   The mechanism of blocking of inclusion of a reverse gear - the device and a functioning principle
   Interaxal differential - the device and a functioning principle
   Removal and installation трансмиссионной assemblages
   Check of a condition and replacement of elements of support of a suspension bracket трансмиссионной assemblages
   Check of a condition and epiploon replacement
   Removal, installation and check of a condition of gauges-switches
   Removal, installation and check of a condition of the gauge of speed (VSS)
   Preparation for performance of major repairs Manual transmission
   Removal, service and installation of a distributing box and transmission lengthening
   Removal, service and installation of a leading gear wheel of the distributing mechanism
   Removal, service and installation of a conducted gear wheel of the distributing mechanism
   Removal, service and installation of interaxal differential
   Removal, service, installation and adjustment of assemblage of the mechanism of blocking of inclusion of a reverse gear
   Removal, installation and condition check картера трансмиссионной assemblages
   Removal, service, installation and adjustment of primary shaft Manual transmission
   Removal, service and installation of entrance shaft Manual transmission (models with an additional two-level reducer)
   Removal, service and installation of assemblage of a shaft of a leading gear wheel of the main transfer of a drive of forward wheels
   Removal, service, installation and adjustment of forward differential
   Removal, installation and check of a condition of a gear wheel of a drive of a speedometer
   Removal, installation and adjustment of an intermediate gear wheel of a reverse gear
   Removal, installation, check and adjustment of assemblage of gear wheels of a two-level reducer
   Removal, check of a condition and installation of plugs and gear change rods
   Removal, service and installation of the lever of gear change Manual transmission
   Removal, service and installation of the lever of switching of modes «Hi/Lo» an additional two-level reducer
   Removal, service and installation тросовой draughts of a drive of switching of modes of a two-level reducer
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


8eee0de7



Removal, installation and check of a condition of gauges-switches

REMOVAL

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.
2. Remove an air cleaner with an air inlet sleeve (see the Head of the Power supply system and release).


Gauges-switches of fires of a backing and neutral position Manual transmission

 PERFORMANCE ORDER

1. Disconnect electroconducting from gauges-switches of fires of a backing and neutral position Manual transmission.
2. Поддомкратьте the car also establish it on props.

3. Remove gauges-switches of fires of a backing and neutral position Manual transmission together with electroconducting.


The gauge-switch of modes of a 2-step reducer «Hi/Lo» (models with an additional reducer)

 PERFORMANCE ORDER

1. Disconnect electroconducting from gauge-switch "Hi/Lo".

2. Liberate burn down electroconductings from a clamp and remove the gauge-switch.

A the Clamp
B Gauge-switch "Hi/Lo"

INSTALLATION

 PERFORMANCE ORDER

Installation is made in an order, the return to an order of dismantle of components. A tightening of gauges make with demanded effort (Specifications and accompanying illustrations to subsection "Removal" see).

CHECK

The gauge-switch of fires of a backing of a backing

 PERFORMANCE ORDER

Measure resistance between plugs №№ 1 and 2 contact sockets of the gauge-switch. At translated in position of a reverse gear the lever of switching Manual transmission the result of measurement should make less than 1 Ohm, in all other positions of the lever - more than 1 МОм. The faulty gauge-switch is subject to replacement.


The gauge-switch of neutral position Manual transmission

 PERFORMANCE ORDER

1. Switch off ignition.
2. Disconnect from the gauge-switch of neutral position Manual transmission electroconducting.
3. Measure resistance between plugs of a 2-contact socket of the gauge-switch. At the lever of switching Manual transmission translated in neutral position the result of measurement should make less than 1 Ohm, in all other positions of the lever - more than 1 МОм. The faulty gauge-switch is subject to replacement.


The gauge-switch of modes of a two-level reducer «Hi/Lo»

 PERFORMANCE ORDER

1. Switch off ignition.
2. Disconnect from the gauge-switch of switching of modes «Hi/Lo» electroconducting.
3. Measure resistance between plugs of a 2-contact socket of the gauge-switch. In a mode «Lo» an additional reducer the result of measurement should make less than 1 Ohm, in a mode «Hi» - more than 1 МОм. The faulty gauge-switch is subject to replacement.