Subaru Legacy/Outback

1. Replacement ATF should be made on a regular basis, according to the Schedule of routine maintenance of the car (see Has undressed the Schedule of routine maintenance of cars Subaru Legacy and Outback). As трансмиссионная the liquid remains hot still long time after trip end before to start procedure performance, wait full cooling of the engine (3-4 hours).
2. Prepare fresh трансмиссионную a liquid of a corresponding grade (Specifications in the beginning of the Head see).
3. Number other necessary for performance of forthcoming procedure of tools and materials concern: подкатной (тележечный) a jack, props for car fixing in the lifted position, drain capacity in volume not less than 10 l and a stock of rags and old newspapers.
4. Park the car on an equal horizontal platform with a firm covering, поддомкратьте it and establish on props, having provided an easy approach to a drain stopper of the pallet картера transmissions.
5. At a corresponding complete set of the car remove protection картера transmissions.

6. Get under the pallet drain capacity and all necessary stock. Try not to touch to located under with the car bottom разогретым to components of the power unit and system of release of the fulfilled gases. Having placed properly reception container, turn out a drain stopper. When вытекание liquids completely will stop, wipe a stopper, screw it on the regular place and tighten with demanded effort (24.5 Nanometers), - do not forget to replace a sealing washer.

7. Refuelling fresh ATF is made through a control/jellied aperture in which stopper it is built in measuring probe. Fill in ATF to the middle of a working range of the "cold" party of an edge measuring probeа.

8. Translate transmission in position «Р», cock a lay brake and start the engine.
9. Serially having spent selector AT lever through all positions, return it in position «Р». Wait, while ATF will not get warm to temperature of an order 60 ч 80 °C, then check up liquid level on "the hot" party probeа. In case of need make corresponding updating.
10. Within first several days of operation of the car try to look regularly under the car, checking transmission on presence of signs of development of leaks. Once again check up level ATF, in case of need make updating.