Subaru Legacy/Outback

1999-2003 of release

Repair and car operation

Removal and installation of panels of an internal upholstery of doors, including a back door (models Legacy the Versatile person and Outback) and a luggage space cover (models the Sedan)

Details of installation of panels of an internal upholstery of doors of the car


1 — the Triangular panel of furnish of a support of a door mirror 2 — the Arm of a support of a door mirror 3 — the Top rubber sealant 4 — the Clamp 5 — the Pillow 6 — the upholstery Panel	7 — Assemblages of switches of the electric drive Glass lifts 8 — the Bottom rubber sealant 9 — the Top panel of an upholstery 10 — Lateral section of the top panel of an upholstery 11 — the Bottom panel of an upholstery

Forward doors

PERFORMANCE ORDER

1. Remove the panel of facing of the internal handle of a door, - for отпускания the top clamp the panel should be delayed on itself, bottom - to wring out downwards.

2. Release two clamps and liberate the panel of switches of the electric drive steklopodemnikov / external rear-view mirrors from a door armrest.

3. Disconnect electroconducting and remove the panel of switches.

4. Turn out three fixing screws and release a forward clamp of fastening of the panel of an internal upholstery.

5. Remove the triangular panel of internal furnish of a support of a door rear-view mirror.

6. Accurately take seven plastic clamps, located on perimetre of the panel of an internal upholstery of a door.

7. Separate the panel from a door and remove it from a frame of last.

8. Remove a door loudspeaker (the Onboard electric equipment see the Head) and accurately separate from the door panel изоляционную an overlay. Try not to damage an overlay or бутиловую a tape of its fastening, - integrity infringement изоляционных materials is fraught with hit in a moisture doorframe, - in case of need replace an overlay.

9. Installation is made upside-down, - track reliability защелкивания clamps. For fixing new изоляционной overlays use бутиловую a type tape 3М8626.

Back doors

The order of performance of procedure is similar described above for forward doors adjusted for absence of necessity for removal of the triangular panel of furnish of a support of a mirror.

Back door (models Legacy the Versatile person and Outback)

PERFORMANCE ORDER

1. Release fixing clamps and remove the bottom panel of an upholstery of a door of a back.

2. Release two clamps and uncover a top level stoplight.

3. Release two fixing clamps and remove the top panel of an upholstery of a door of a back.

4. Installation is made upside-down.

Luggage space cover (models the Sedan)

PERFORMANCE ORDER

1. Open a luggage space cover.

2. Release fixing clamps and remove the panel of an internal upholstery of a cover.

3. Installation is made upside-down.