1999-2003 of release
Repair and car operation
Subaru Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual box and differential
+ Automatic transmission
+ Flywheel and coupling
- Приводные and карданный shaft, back differential
Drive of forward wheels - the general information
Removal and installation of rotary fists, service ступичных assemblages of forward wheels
Removal, service and installation of a forward power shaft
Drive of back wheels - the general information
Removal and installation ступичных assemblages of back wheels, replacement back ступичного the bearing
Removal, check of a condition and installation of components карданного a shaft
Check of a condition and replacement of a forward epiploon of back differential
Removal, service, installation and adjustment of back differential of T-type
Removal, service, installation and adjustment of back differential of VA-type
Removal, installation and check of a condition of a forward beam of fastening of back differential
Removal, service and installation of a back power shaft
+ Brake system
+ Suspension bracket and steering
+ Onboard electric equipment
Приводные and карданный shaft, back differential
Drive of forward wheels - the general informationDetails of connection of a power shaft to a nave of a forward wheel
Power shafts from both ends are equipped by hinges of equal angular speeds (SHRUS)
For transfer of a twisting moment from lateral gear wheels of forward differential трансмиссионной assemblages to car driving wheels serve forward power shafts.
Details of a joint of a power shaft with ступичной assemblage of a forward wheel are shown on an illustration.
The internal ends of both power shafts are entered into gearing with transmission by means of hinges of equal angular speeds (SHRUS) with a working angular range in 25 °. On type internal SHRUS concern to триподным вибропоглощающим to hinges of free rotation. Unlike the external SHRUS rigidly fixed in naves of forward wheels, internal hinges possess moving freedom in an axial direction. External hinges differ a wide working angular range (to 47.5 °). In aggregate hinges provide smoothness and uniformity of rotation of driving wheels with a minimum level of transferred vibrations.
Naves of forward wheels are fixed in rotary fists by means of planted with a pretightness noncontrollable конусных roller bearings. Shaft of external SHRUS are passed in naves and fixed chromeplated and ступичными by colour nuts khaki.
Brake disks established outside, for simplification of service fasten to disks of wheels by means of wheel bolts.