|
1. Remove the air cleaner case (see the Head of the Power supply system and release).
2. Disconnect from the executive cylinder a hydraulic hose, - at once закупорьте the open ends of a hose and the reception union in order to avoid hit of a dirt in a hydraulic path.
|
|
3. Turn out fixing screws and remove the executive cylinder with картера Manual transmission.
Efforts of a tightening of carving connections, Nanometer
Т1: 18
Т2: 37 |
4. Attentively study a cylinder condition, - in case of detection of mechanical damages or signs of development of leaks, cylinder assemblage is subject to replacement.
5. Installation is made in an order, the return to an order of dismantle of components. Track, that all fixture has been tightened with demanded effort.
|
|
Before installation contacting to the lever of deenergizing of coupling it is necessary to grease a surface of a rod of the cylinder with greasing of type Sunlight 2: P/N 003602010. |
6. Remove from the cylinder air (see Has undressed Removal of air from a hydraulic path of a drive of deenergizing of coupling) and check up serviceability of functioning of coupling. |
