|
|
The detachment/connection of hoses should be made, without putting to them twisting effort! Watch, that the connected hoses have not been overwound. It is necessary to cork the open ends of refrigerator lines at once approaching заглушками! |
1. Make a discharge of a central air in the conditions of a specialised workshop.
2. Disconnect a negative wire from the battery.
3. Remove an air inlet (see Has undressed Service of components of an inlet air path).
4. Turn out fixing bolts (), disconnect низконапорный a hose from the evaporator and the compressor and remove it from the car.
5. Turn out bolts (D), disconnect высоконапорный a hose from the compressor and the condenser and remove it from the car.
6. Attentively study a condition of the removed hoses. In case of revealing of cracks, cuts and other damages replace defective components.
7. Installation is made upside-down, - add in the compressor of refrigerator oil of 1 ml.
|
|
The central air recharge should be made in the conditions of a car-care centre workshop. |
|
