1999-2003 of release
Repair and car operation
Subaru Legasi, Autbek
- Cars Subaru Legacy, Outback
Identification numbers and information labels
Acquisition of spare parts
Technology of service, the tool and the workplace equipment
Поддомкрачивание and towage
Start of the engine from the auxiliary power supply
Automobile химикалии, cleaners, hermetics
Diagnostics of malfunctions of knots and car systems
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual box and differential
+ Automatic transmission
+ Brake system
+ Suspension bracket and steering
+ Onboard electric equipment
Поддомкрачивание and towageПоддомкрачивание
The scheme of an arrangement of points поддомкрачивания the car is presented on illustrations more low.
For поддомкрачивания it is necessary to park the car on an equal horizontal surface, whenever possible with a firm covering. In the presence of the slightest bias it is necessary to take care of safety measures against recoil: prop up located on a diagonal from subject to removal a wheel противооткатными boots), firmly cock a lay brake, include a reverse gear (Manual transmission), or translate the selector lever in position «Р» (АТ). Try not to depart far from поддомкраченного the car, especially if nearby there are children.
At performance of change of wheels before поддомкрачивать the car, remove a decorative cap and баллонным a key ослабьте nuts of fastening of a wheel subject to replacement. Prepare запаску.
The scheme of an arrangement of a spare wheel and jack in a car luggage space is shown on illustrations 36 and 37. The spare wheel fastens in a special niche under the panel of a floor of a luggage space, the jack is fixed in the special pocket equipped with a cover in the right lateral panel of furnish, in the same place is usually stored and баллонный a key. For extraction of a spare wheel it is necessary to turn out the special fixing screw.
For jack extraction open a side pocket cover, then, rotating counter-clockwise, release the jack screw.
Get a jack under the car. Take care of reliability of input of a head of a jack in gearing. Rotating the jack handle, lift the car so that the wheel subject to replacement has come off the earth. Having thrown off fixing nuts, remove a wheel and establish on its place spare, preliminary having cleared of a dirt a nave and an internal surface of a wheel disk. Screw wheel nuts, then lower the car on the earth, clean a jack and hold on nuts of fastening of a wheel in a diagonal order with demanded effort (78 ÷ 98 Nanometers). Establish into place a cap. Combine and clean the tool. Do not forget to clean противооткатные boots. Track reliability of fixing of the wheel removed from the car.
At поддомкрачивании the car for the purpose of its fixing in the lifted position at performance of more serious, than replacement of a wheel, repair work the head of a hydraulic jack should be got under a forward stretcher or картер differential of a back axis. For the purpose of loading distribution between a head of a jack and a surface домкратной the wooden block makes sense to lay points. Props are got under regular forward and back lateral домкратные points.
Strictly speaking, the emergency vehicle equipped with a full drive (AWD), automatic transmission (АТ) and VTD it is necessary to tow with a full separation of wheels from the earth on a platform эвакуатора.
As already it was told above, is better to carry out transportation of the failed 4WD-car with a full separation of wheels from the earth. At car installation on a platform эвакуатора it is necessary to include the first transfer (models with Manual transmission) / or to translate the selector lever in position «Р» (models with АТ) to cock a lay brake and it is reliable to fix safety chains. Watch, that chains have not been tense too strongly as it will lead to excessive compression of elements of a suspension bracket and is fraught with destruction of the last at jolting during movement. Schemes раскрепления the car on a platform and admissible corners of extension of safety chains are presented on illustrations.
It is in a special emergency supposed to make towage of an emergency vehicle without a separation from the earth of all four wheels.
Use at towage only towing sling specially intended for this purpose which can be got cheaply practically in any shop of automobile accessories. The sling should cling only to eyes specially intended for this purpose which at all should not be confused with safety скобами.
Do not forget to turn a key in the lock of ignition of the towed car in position ON, otherwise inevitably there will be a blocking of a steering column. Besides, at the included ignition indexes of turns and stoplights are activated also.
Remember that at the switched off engine efficiency of braking of the car considerably decreases because the vacuum amplifier of brakes ceases to function. Thus it is necessary to squeeze out a pedal of a foot brake with a little big, than usually effort. On the models equipped with the hydraulic booster of a wheel, at maneuvering performance большее the effort should be put also to a steering wheel.
The driver of a towed vehicle should try keep constantly a towing sling in the tense position in order to avoid jerks and arrivals on it wheels.
Before a start of motion drivers of both vehicles (towing and towed) should co-ordinate among themselves a route.
Movement should be carried out only with moderate speeds, on the shortest route and observance ПДД. Avoid sharp braking, accelerations and maneuvering.